B&R Industries Provit 5000 User Manual - page 319
318
Provit 5000 User’s Manual
Software • BIOS Upgrade
4. BIOS Upgrade
To upgrade your BIOS to a newer version, you will need the Provit 5000 Upgrade diskette, which
is found on the Provit Drivers & Utilities CD-ROM (model number 5S0000.01-090) or
downloaded directly from the support area of the B&R homepage (www.br-automation.com).
An upgrade might be necessary for several reasons:
•
BIOS was destroyed or damaged and the IPC can no longer be booted.
(for booting in the Recovery Mode and subsequent BIOS upgrade, see the section
"Recovery-Jumper / User-Jumper").
•
To upgrade functions implemented in BIOS Setup or to add new
functions or components.
•
To guarantee MTC function libraries on Provit 5000 IPCs
(see also section "MTC function libraries").
To carry out a BIOS Upgrade, the following steps should be taken:
First, the diskette must be made bootable (commando line "sys a:" or "format a: /s")
MTC Communication Assigned I/O
Port
110h
110h
110h
110h
110h
110h
User Serial ID
No
No
No
No
No
No
Show
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
Show
Statistic
Statistic
Statistic
Statistic
Statistic
Statistic
Skip Ext. Alarm
No
No
No
No
No
No
1) Depends on the connected display type
Elite BIOS Version
Description
V01.13
V01.14
V01.15
BIOS
Defaults
Setup
Defaults
BIOS
Defaults
Setup
Defaults
BIOS
Defaults
Setup
Defaults
Table 181: Additional Peripherals V01.13, V01.14 and V01.15 (cont.)