B&R Industries Provit 5000 User Manual - page 289
288
Provit 5000 User’s Manual
Software • BIOS for System Unit with Socket 370
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller in your system.
Typematic rate and typematic delay options are irrelevant if disabled. However
when Enabled, the typematic Rate and a typematic delay can be selected.
Typematic Rate (chars/sec)
When the typematic rate setting is enabled, you can select a typematic rate (the
rate at which the character repeats when you hold down a key) of 6, 8, 10, 12, 15,
20, 24 or 30 characters per second. The repeat rate determines the speed that
characters are repeated when a key is pressed and held down.
Note: The accuracy of this setting is ±20%.
Typematic Delay (ms)
When the typematic rate setting is enabled, you can select a typematic delay (the
delay before key strokes begin to repeat) of 250, 500, 750 or 1000 milliseconds.
The typematic delay is the period of time which passes between pressing the key
and the appearance of the next characters (when a key is pressed and held
down).
Note: The accuracy of this setting is ±20%.
Security Option
Here you can select between Setup and System. This option appears after a
password is requested. If you have a password, select whether the password is
required every time the system boots, or only when you enter Setup.
PS/2 Mouse Function Control
Switches the PS/2 connection on or off when using a PS/2 pointing device.
PCI/VGA Palette Snoop
This option is set as a default to Disabled and should not be changed.