B&R Industries Provit 5000 User Manual - page 150
Provit 5000 User’s Manual
149
Chapt
er
2
C
on
tro
lle
rs
Controllers • Main Memory
13. Main Memory
The type of DRAM modules which can be used, depends on the system unit or controller:
Slots for DRAM modules are accessible after opening the housing.
DRAM modules are allowed to be a maximum of 29.5 mm high if used in IPC5000/
IPC5000C.
13.1 System Units with SIMM Slots
The mainboards of system units 5C5001.01, 5C5001.03 and 5C5601.01 are equipped with two
72 pin standard PS/2 SIMM slots (also see section "DRAM socket").
Because of the chipset used (Intel 430HX), two identical SIMM module (size and organization)
must always be used.
Controller
IPC5000/IPC5600
System Units
5C5001.01
5C5001.03
5C5601.01
Slots
2 x PS/2 SIMM (72 pin) FPM or EDO
Size
9A0004.03
4 MB
9A0004.05
8 MB
9A0004.04
16 MB
9A0004.06
32 MB
9A0004.07
64 MB
Table 109: Main memory IPC5000 and IPC5600
Controller
IPC5000C / IPC5600C
System Units
5C5001.11
5C5001.12
5C5601.11
5C5601.12
Slots
3 x DIMM (168 pin) PC100 SDRAM
Size
9A0004.11
64 MB
9A0004.12
128 MB
9A0004.14
256 MB
Table 110: Main memory IPC5000C and IPC5600C