B&R Industries Provit 5000 User Manual - page 81
Manual is about: Automation PC
of
400
80
Provit 5000 User’s Manual
Controllers • Provit 5600 IPC Configuration Options
d) Reinstalling the drive
Depending on whether the drive with your IPC is accessible from the front or the back, you must
now remove or install a cover plate on the "opposite side", so that the unnecessary opening of
the housing is now closed. The drive can then be reinstalled on the mounting frame in the desired
alignment.
If the drives are accessible from the front of the IPC, they can be installed either level with the
front of the controller or level with the front of a mounted display.
To reassemble your IPC, carry out the above steps in reverse.
Figure 38: Aligning the drive to the front or the back
Figure 39: Mounting options