B&R Industries Provit 5000 User Manual - page 362
Manual is about: Automation PC
of
400
Provit 5000 User’s Manual
361
Chapt
er
8
T
ec
hnic
al
A
p
pendix
Technical Appendix • Maintenance Work
7.1 Removing the Housing Cover
The housing cover must be removed in order to change the battery or the fuse. The marked
screws must be removed.
7.2 Maintenance Work on the Mainboard
7.2.1 CMOS Battery
Provit 5000 controllers are equipped with a lithium battery (for technical data see section "Lithium
Battery").
Changing the battery
1. Disconnect the lines to the power supply
2. Touch the housing or earth connection (not the power supply!) in order to discharge any
electrostatic charge from your body
3. Remove the housing cover (see section "Removing the Housing Cover")
IPC5000 / IPC5000C
IPC5000C / IPC5600C