D-Link DES-3326 User Manual - Console Usage Conventions
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
119
Console Usage Conventions
The console interface makes use of the following conventions:
1. Items in
angle brackets
>
can be toggled between several
choices using the space bar.
2. Items in
[
square brackets
]
can be changed by typing in a new
value. You can use the backspace and delete keys to erase
characters behind and in front of the cursor.
3. The up and down arrow keys, the left and right arrow keys,
the tab key and the backspace key, can be used to move
between selected items.
4. Items in UPPERCASE are commands. Moving the selection
to a command and pressing Enter will execute that
command, e.g. APPLY, etc.
Please note that the command APPLY only applies for the current
session. Use Save Changes from the main menu for permanent
changes. Save Changes enters the current switch configuration
into non-volatile ram, and then reboots the switch.
First Time Connecting To The Switch
The Switch supports user-based security that can allow you to
prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
Note: The passwords used to access the Switch are case-
sensitive; therefore, “S” is not the same as “s.”
When you first connect to the Switch, you will be presented with
the first login screen (shown below).
Note: Press Ctrl+R to refresh the screen. This
command can be used at any time to force the console
program in the switch to refresh the console screen.