D-Link DES-3326 User Manual - Saving Changes
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Network Management
243
Switch Configuration
Privilege
Management
Root User+
User
Configuration
Yes
Read Only
Read Only
Network Monitoring
Yes
Read Only
Read Only
Community Strings and Trap Stations
Yes
Read Only
Read Only
Update Firmware and Configuration
Files
Yes No
No
System Utilities
Yes
Ping Only
Ping Only
Factory Reset
Yes
No
No
Reboot Switch
Yes
Yes
No
User Accounts Management
Add/Update/Delete User Accounts
Yes
No
No
View User Accounts
Yes
Yes
Yes
Table 7-1. Root, User+, and User Privileges
After establishing a User Account with Root-level privileges,
highlight Save Changes and press Enter (see below). The switch
will save any changes to its non-volatile ram and reboot. You can
logon again and are now ready to continue configuring the Switch.
Saving Changes
The DES-3326 has two levels of memory; normal RAM and non-
volatile or NV-RAM. Configuration changes are made effective by
highlighting
Apply
and pressing Enter. When this is done, the
settings will be immediately applied to the switching software in
RAM, and will immediately take effect.
Some settings, though, require you to restart the switch before
they will take effect. Restarting the switch erases all settings in