D-Link DES-3326 User Manual - Factory Reset
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
244
Web-Based
Network
Management
RAM and reloads the stored settings from the NV-RAM. Thus, it is
necessary to save all setting changes to NV-RAM before rebooting
the switch.
To retain any configuration changes permanently, highlight
Save
Changes
from the main menu. The following screen will appear to
verify that your new settings have been saved to NV-RAM:
Figure 7-5. Save Changes Screen
Once the switch configuration settings have been saved to NV-
RAM, they become the default settings for the switch. These
settings will be used every time the switch is rebooted.
Factory Reset
The following menu is used to restart the switch using only the
configuration that was supplied by the factory. A factory reset
returns all configuration options to their default values and
restores the switch’s configuration to the factory settings.
All user-entered configuration information will be lost.