D-Link DES-3326 User Manual - page 310
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
296
Web-Based
Network
Management
Entries
Parameter
Description
MAC Address
Displays the MAC address for which
priority on the switch is to be established.
VID
Displays the VLAN ID of the VLAN on
which the MAC address above resides.
Level
Displays the priority of the above MAC
address. The options are; Low, Med-L –
medium low, Med-h – medium high, and
High.
State
Displays the state under which the above
priority will be active. The options are;
Dst. – destination, Src. – source, and
Either.
Mirroring
Traffic from any source port to a target port can be mirrored for
real-time analysis. A logic analyzer or an RMON probe can then
be attached to study the traffic crossing the source port in a
completely unobtrusive manner. When mirroring port traffic, note
that the target port must be configured in the same VLAN and be
operating at the same speed as the source port. If the target port
is operating at a lower speed, the source port will be forced to drop
its operating speed to match that of the target port.
The port mirror configuration screen can be used to designate a
single RJ-45 port pair for mirroring as shown below: