D-Link DES-3326 User Manual - Forwarding
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
195
Figure 6-58. IP Address Filtering Setup
The Action: field can be toggled between Add/Modify and
Delete using the space bar. Enter the IP address to be filtered in
the IP Address:[ ] field.
The Source/Destination: field can be toggled between Src.
(source), Dst. (destination), and Either. The IP address entered
into the filtering table can be filtered as a source (packets will not
be received from the IP address), as a destination (packets will not
be transmitted to the IP address), or as either a source or
destination (packets will not be received from or transmitted to the
IP address.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
Forwarding
Layer 2 Forwarding
Layer 2 Only switch operation mode
To enter a MAC address into the switch’s forwarding table:
Highlight Forwarding from the Main Menu and press enter.