D-Link DES-3326 User Manual - page 172
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
158
Configuring the Switch Using the Console Interface
Figure 6-30. VLAN Menu
To configure the port settings of an 802.1Q VLAN, highlight
Configure 802.1Q Port Settings and press enter:
Figure 6-31. Configure 802.1Q Port Settings
Each port can be configured to use an Ingress Filter. The ports to
be configured in a given session can be identified by either entering
a range of port numbers or by entering the PVID#.
Ingress filtering is toggled between On and Off using the space
bar.
To configure a port’s 802.1Q VLAN settings:
Highlight the Configure Port from [ ] to [ ] field and enter the
range of port numbers you want to configure. As an alternative
you can use the arrow keys to highlight the PVID#[ ] field and
enter the PVID for the VLAN’s member ports you want to
configure.