D-Link DES-3326 User Manual - Serial Port Settings
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
404
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
140
Configuring the Switch Using the Console Interface
Serial Port Settings
The Serial Port Settings screen allows the configuration of the
switch’s serial port and out-of-band TCP/IP communications using
SLIP.
Highlight Serial Port Settings and press enter.
Figure 6-18. Serial Port Settings Screen
Toggle the Select Protocol: field to select either the
Console or SLIP protocol.
The following fields can then be set:
•
Auto-Logout - This sets the time the interface can be
idle before the switch automatically logs-out the user.
The options are 2 mins, 5 mins, 10 mins, 15 mins, or
Never.
•
Baud Rate - Sets the serial bit rate that will be used to
communicate the next time the Switch is restarted.