D-Link DES-3326 User Manual - page 21
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Introduction
7
and switches. Connections to hubs must take place at half-
duplex.
•
Supports IEEE 802.3x flow control for full-duplex mode
ports.
•
Supports Back-pressure flow control for half-duplex mode
ports.
•
Auto-polarity detection and correction of incorrect polarity
on the transmit and receive twisted-pair at each port.
•
IEEE 802.3z compliant for all Gigabit ports (optional
module).
•
IEEE 802.3x compliant Flow Control support for all Gigabit
ports (optional module).
•
IEEE 802.3ab compliant for 1000BASE-T (Copper) Gigabit
ports (optional module).
•
Data forwarding rate 14,880 pps per port at 100% of wire-
speed for 10Mbps speed.
•
Data forwarding rate 148,800 pps per port at 100% of wire-
speed for 100Mbps speed.
•
Data filtering rate eliminates all error packets, runts, etc. at
14,880 pps per port at 100% of wire-speed for 10Mbps speed.
•
Data filtering rate eliminates all error packets, runts, etc. at
148,800 pps per port at 100% of wire-speed for 100Mbps
speed.
•
8K active MAC address entry table per device with
automatic learning and aging (10 to 9999 seconds).
•
16 MB packet buffer per device.
•
Broadcast and Multicast storm filtering.