D-Link DES-3326 User Manual - page 260
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
246
Web-Based
Network
Management
In addition, several other parameters may need to be configured or
known to properly communicate with the switch or allow full
management capability. These include:
•
Default Gateway
•
Trap Destination and Community Name
Configuration of these items may be made from the User Interface,
which is accessible via either the serial console or Telnet. Refer to
the User Guide that came with your system for more information
subsection describe the required configuration.
Setting an IP Address
The IP address for the switch must be set before it can be managed
with the web-based manager. The switch IP address may be
automatically set using BootP protocol, in which case the actual
address assigned to the switch must be known.
The IP address may alternatively be set manually as follows:
1.
Starting at the Main Menu of the User Interface,
select Configuration / IP Address.
2.
Select IP Address from the menu and enter the IP
address.
3.
Select Subnet Mask from the menu and enter the
appropriate mask.
4.
Click APPLY to make the change effective. Use
Save Changes to enter the IP address into NV-
RAM.