D-Link DES-3326 User Manual - page 190
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
176
Configuring the Switch Using the Console Interface
Figure 6-43. IEEE 802.1Q Multicast Forwarding Settings
The Action: field can be toggled between
Add/Modify and Delete using the space bar. To add a new entry
to the multicast forwarding table, select Add/Modify and enter the
VID of the VLAN that will be receiving the multicast packets.
Enter the MAC address of the multicast source, and then enter the
member ports.
Each port can be an Egress, Forbidden, or a Non-member of the
multicast group, on a per-VLAN basis.
To set a port’s multicast group membership status, highlight the
first field of (E/F/-): [ ][ ][ ]. Each port’s multicast group
membership can be set individually by highlighting the port’s entry
using the arrow keys, and then toggling between E, F, or – using
the space bar.
E - (Egress Member) specifies the port as being a static
member of the multicast group. Egress Member Ports are