D-Link DES-3326 User Manual - User Accounts Management
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
123
User Accounts Management
From the Main Menu, highlight Setup User Accounts and press
Enter, then the Setup User Accounts menuappears.
1. Toggle the Action: field to using the space bar.
This will allow the addition of a new user. The other options
are - this allows the deletion of a user entry, and
- this allows for changes to be made to an existing
user entry.
2. Enter the new user name, assign an initial password, and then
confirm the new password. Determine whether the new user
should have
space bar toggles between the three options.
3. Highlight APPLY and press enter to make the user addition
effective.
4. Press Esc. to return to the previous screen or Ctrl+T to go to
the root screen.
5. A listing of all user accounts and access levels is shown below
the user setup menu. This list is updated when Apply is
executed.
6. Please remember that Apply makes changes to the switch
configuration for the current session only. All changes
(including User additions or updates) must be entered into non-
volatile ram using the Save Changes command on the Main
Menu - if you want these changes to be permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and User.
Some menu selections available to users with Root privileges may
not be available to those with User+ and User privileges.