D-Link DES-3326 User Manual - Dns Relay
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
404
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
217
(or servers, as the case may be), highlight APPLY and press enter
to enter the information into the BOOTP Relay table. Use Save
Changes from the Main Menu to enter the information into NV-
RAM.
DNS Relay
To enter the IP addresses of DNS Relay servers:
Highlight DNS Relay on the Switch Utilities menu and press
enter.
Figure 6-78. DNS Relay Setup – Layer 3
The DNS Relay Status can be toggled between
Disabled and Enabled using the space bar. Toggle the field to
Enabled, enter the IP address of the Primary name server and a
secondary server, if so desired.