D-Link DES-3326 User Manual - page 175
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
161
To edit an existing 802.1Q VLAN, highlight the
Action: field and toggle between Add/Modify and
Delete. In the Add/Modify mode, both individual entrees to a
selected VLAN and entire VLANs can be added. In the Delete
mode, entire VLANs can be deleted. VLANs to be edited can be
selected by either the VID#[ ] field or the VLAN Name:[ ]
fields. Enter either the VID or the VLAN Name for the 802.1Q
VLAN you want to edit and press enter.
Note: To delete an entire VLAN, toggle the
Action: field to Delete, enter either the
VID or the VLAN Name in the appropriate field and
press Enter. Highlight Apply and press Enter. The
selected VLAN will be deleted. To enter the change
into Non-volatile RAM, select Save Changes from the
Main Menu.
The 802.1Q VLANs are edited by specifying which ports will be
Egress Members, Forbidden non-members or non-members.
The ports are further set to be either a Tagged or an Untagged
port.
To edit the 802.1Q VLAN membership of a port:
Highlight the first field of Membership (E/F/-): [ ][ ][ ]. Each
port’s 802.1Q VLAN membership can be set individually by
highlighting the port’s entry using the arrow keys, and then
toggling between E, F, or – using the space bar.
E - (Egress Member) specifies the port as being a static
member of the VLAN. Egress Member Ports are ports that
will be transmitting traffic for the VLAN. These ports can
be either tagged or untagged.
F - (Forbidden Non-Member) specifies the port as not being
a member of the VLAN and that the port is forbidden from
becoming a member of the VLAN dynamically.