D-Link DES-3326 User Manual - page 149
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
135
protocol or the WEB-based Manager. Please see the next chapter
for Web-based network management information.
The Remote Management Setup menu lets you specify how the
switch will be assigned an IP address to allow the switch to be
identified on the network.
To setup the switch for remote management:
Highlight
Remote
Management
Setup
from the main menu.
The following screen appears:
Figure 6-15. Remote Management Setup
Configuring the Switch’s IP Address
The Switch needs to have an IP address assigned to it so that an
In-Band network management system (eg. WEB-based Manager
or
TELNET
)
client can find it on the network. The Remote
Management Setup screen allows you to change the settings for
the two different management interfaces used on the Switch: the