D-Link DES-3326 User Manual - page 206
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
192
Configuring the Switch Using the Console Interface
The Action: field can be toggled between Add/Modify and
Delete using the space bar.
Enter the VLAN ID in the VID: [ ] field and the MAC address to
be filtered in the MAC Address:[ ] field. This address must be
a unicast MAC address.
The Module: field can be toggled between Base Unit (the 24
ports Fast Ethernet ports) and Slot-1 (the two optional Gigabit
ports). Enter the port number in the Port: [ ] field.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to save the changes to
NV-RAM.
Layer 3 (IP Routing) Filtering
The switch is in IP Routing switch operation mode.
With the switch configured to Layer 3 Operation mode, both MAC
and IP addresses can be entered into the filtering table. To enter
an address, highlight Filtering from the Main Menu and press
enter.