D-Link DES-3326 User Manual - page 163
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Configuring the Switch Using the Console Interface
149
DVMRP Include Report from Unknown Neighbor
: This field can be toggled between Enabled
and Disabled using the space bar. This enables or disables
the inclusion of DVMRP membership reports from
unknown neighbor routers.
PIM-DM state : This field can be toggled
between Enabled and Disabled using the space bar. This
enables or disables, globally, the Protocol Independent
Multicasting – Dense Mode (PIM-DM) multicasting
protocol.
The DVMRP and PIM-DM are set using the IP Multicasting
Settings – from the Main Menu under Multicasting.
Highlight APPLY and press enter to make the changes current.
Layer 3 Switch Mode - Setup RIP
The Routing Information Protocol (RIP) is a distance-vector
protocol that uses the hop count as its criteria for making routing
decisions. RIP is an Interior Gateway Protocol (IGP), which means
that it performs routing within a single autonomous system.
Highlight Setup RIP Configuration from the Layer 3 IP
Networking menu and press enter.