D-Link DES-3326 User Manual - page 162
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
148
Configuring the Switch Using the Console Interface
Layer 3 IP Routing Protocol Settings
Note: These IP Routing Protocol Settings are only for
enabling or disabling, globally, routing protocols available
on the switch. The Routing Information Protocol (RIP) is
setup under IP Networking from the Main Menu.
To access the Layer 3 Switch Settings menu, highlight Layer 3
IP Routing Protocol Settings on the Switch Settings menu
and press enter.
Figure 6-25. Layer 3 IP Routing Protocol Settings
IP Multicast Settings:
DVMRP state : This field can be toggled
between Enabled and Disabled using the space bar. This
enables or disables, globally, the Distance-Vector Multicast
Routing Protocol (DVMRP).