D-Link DES-3326 User Manual - page 289
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Network Management
275
IP Address
The IP address of the IP interface to be
edited.
Subnet Mask
The subnet mask of the IP interface to be
edited.
VID
The VLAN ID of the VLAN corresponding
to this IP interface.
Active
Allows this IP interface to be Active or
Inactive on the switch.
Port Member
Displays the ports that are members of this
IP interface and its corresponding VLAN.
Setup RIP
The Routing Information Protocol (RIP) is a distance-vector
protocol that uses the hop count as its criteria for making routing
decisions. RIP is an Interior Gateway Protocol (IGP), which means
that it performs routing within a single autonomous system.
Figure 7-21. Setup RIP Screen
Parameter
Description
Subnet Name
Displays the name of the subnet on which
RIP is to be setup. This subnet must be
previously configured on the switch.
IP Address
Displays the IP address corresponding to
the subnet name above.