D-Link DES-3326 User Manual - page 334
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
404
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
320
Web-Based
Network
Management
Figure 7-54. BOOTP/DHCP Relay Screen
Parameter
Description
BOOTP/DHCP Relay Status
Allows the BootP/DHCP
relay function to be Enabled
or Disabled.
BOOTP HOPS Count Limit
Allows the maximum
number of hops (routers)
that the BootP messages
can be relayed through to
be set. If a packet’s hop
count is more than the hop
count limit, the packet is
dropped. The range is
between 1 and 16 hops. The
default value is 4.
BOOTP/DHCP Relay Time Thresh. Sets the minimum time (in
seconds) that the switch
will wait before forwarding
a BOOTREQUEST packet.
If the value in the seconds
field of the packet is less
than the relay time
threshold, the packet will