D-Link DES-3326 User Manual - Pim-Dm
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
182
Configuring the Switch Using the Console Interface
of the multicast delivery tree (not ‘pruned’) – if there is an
alternative route.
The Probe Interval:[10 ] field allows an entry between 1 and
65,535 seconds and defines the interval between ‘probes’. DVMRP
defines an extension to IGMP that allows routers to query other
routers to determine if a multicast group is present on an given
router subnetwork or not. This is referred to as a ‘probe’. The
default is 10.
The State: field can be toggled between Enabled and
Disabled and enables or disables DVMRP for the IP interface.
The default is Disabled.
PIM-DM
To configure PIMDM for an IP interface:
Highlight PIMDM Interface Configuration from the Setup IP
Multicast menu and press enter.