D-Link DES-3326 User Manual - page 369
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Sample Configuration File
355
•
PROM – PROM update file.
•
RUNTIME – Switching software update file.
•
CONFIG – Image file of switch settings created by
the settings backup procedure.
♦
Image_file
– this command tells the switch the complete
path and filename for the file to be loaded into the switch. For
example, “
e:\3326\3326prom.tfp
”. Make sure double-
quotes are used as in the example file below.
♦
Ip_addr
– this is the IP address that will be assigned to the
switch. This command is included for downloading a
configuration settings file to another switch. The IP address
defined in this file will override the IP address in the
configuration settings file, thus the switch you are
downloading to can have a different IP address than the one
that created the configuration settings file. An example IP
address is
10.12.19.102
.
♦
Subnet_mask
– this is the subnet mask that will be assigned
to the switch. An example subnet mask is
255.128.0.0
.
♦
Default_gateway
– this is the default gateway IP that will
be assigned to the switch. An example default Gateway IP is
10.254.254.253
.
♦
# – Remark. When placed as the first character on a line, the
entire line will be ignored by the switch. This allows items to
be labeled, or unused commands to remain in the file so that
the syntax will not be forgotten.
Notes about the Configuration File:
This configuration file can only contain 4 settings:
Code_type,
Ip_addr,
Subnet_mask
and
Default_gateway
.