D-Link DES-3326 User Manual - page 285
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Network Management
271
Layer 3 IP Routing Protocol Settings
Note: These IP Routing Protocol Settings are only for
enabling or disabling, globally, routing protocols available
on the switch. The Routing Information Protocol (RIP) is
setup in the Setup RIP section later in this manual.
Figure 7-17. Layer 3 IP Routing Protocol Settings
Parameter
Description
RIP
Allows RIP to be Enabled or
Disabled. This enables or disables,
globally, the Routing Information
Protocol (RIP).
DVMRP
This enables or disables, globally,
the Distance-Vector Multicast
Routing Protocol (DVMRP).
DVMRP Incld. Report.
(This version of DVMRP allows
reports from Unknown neighbor
routers). This enables or disables,
globally, the Distance-Vector
Multicast Routing Protocol
(DVMRP).
PIMDM
This enables or disables, globally,
the Protocol Independent