D-Link DES-3326 User Manual - Multicasting
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
168
Configuring the Switch Using the Console Interface
Interface Name:[ ] allows the entry of a name for the IP
interface. The default IP interface is named “System”.
IP Address:[ ] is the IP address to be assigned to this
subnet.
Subnet Mask:[ ] is the subnet mask to be applied to
this subnet. It has the same form as an IP address.
Active: is toggled between Yes and No. This entry
makes determines whether the subnet will be active or not.
VID:[ ] allows the entry of the VLAN ID number for the
VLAN the IP interface belongs to. The VLAN must have
been previously created.
Press APPLY to make the additions/deletions effective for
the current session. To make enter the IP Interfaces into
NV-RAM, use Save Changes from the Main Menu.
Multicasting
Layer 2 Multicast Setup
IGMP Snooping Settings – by VLAN
To access the Multicasting Menu, highlight Multicasting from
the Main Menu and press enter.