D-Link DES-3326 User Manual - page 178
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
164
Configuring the Switch Using the Console Interface
configured prior to setting up the corresponding IP interface. An
IP addressing scheme must then be established, and implemented
when the IP interfaces are set up on the switch.
An example is presented below:
VLAN Name
VID
Switch Ports
System (default)
1
5, 6, 7, 8, 21, 22, 23, 24
Engineering
2
9, 10, 11, 12
Marketing
3
13, 14, 15, 16
Finance
4
17, 18, 19, 20
Sales
5
1, 2, 3, 4
Backbone 6
25,
26
Table 6-1. VLAN Example – Assigned Ports
In this case, 6 IP interfaces (or 6 subnets) are required, so a CIDR
notation of 10.32.0.0/11 (or a 11-bit) addressing scheme will work.
This addressing scheme will give a subnet mask of
11111111.11100000.00000000.00000000 (binary) or 255.224.0.0
(decimal).
Using a 10.xxx.xxx.xxx IP address notation would give 6 network
addresses:
VLAN Name
VID
Network Address
System (default)
1
10.32.0.0
Engineering 2
10.64.0.0
Marketing 3
10.96.0.0