D-Link DES-3326 User Manual - page 370
Manual is about: 24-Port Fast Ethernet Plus 2-Port Gigabit Module Layer 3 Switch
of
404
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
356
Sample
Configuration
File
Each command can only appear once in the configuration file.
If both the Firmware Update and Use Configuration file options
are enabled, the Firmware Update command will take precedence
and only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings
and was created by the switch is prefixed with the version number
of the runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3326\3326prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.0.0.0
# specify default gateway
Default_gateway = 10.1.1.254