D-Link DES-3326 User Manual - page 156
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
142
Configuring the Switch Using the Console Interface
supported and the switch is considered as a VLAN-
tag aware device.
2.
IP Routing with IEEE 802.1Q VLAN support:
the switching process is based upon the IP source
and destination addresses, if present. If the IP
addresses are not present, the switching process is
based upon the MAC addresses (as in Layer 2 above).
802.1Q VLANs are supported and the switch is
considered as a VLAN-tag aware device.
The switch must be rebooted when changing the operation mode
before the new operation mode can take effect.
Changing the Switch Operation Mode
To change the switch’s operating mode:
Highlight Switch Settings on the main menu and press enter.
Figure 6-19. Switch Settings Screen