Jeep Wrangler 1997 Manual - page 1021
TRANSMISSION
DISASSEMBLY
(1) Remove transmission from vehicle.
(2) Install a suitable tail shaft housing plug to
avoid contaminating internal components with clean-
ing solvents.
(3) Clean exterior of transmission with suitable
solvent or pressure washer.
(4) Remove torque converter from transmission.
(5) Remove throttle and shift levers from valve
body manual shaft and throttle lever shaft.
(6) Mount transmission in repair stand C-3750-B
or similar type stand (Fig. 69).
(7) Remove extension housing.
(8) Remove fluid pan.
(9) Remove park/neutral position switch and seal
(Fig. 70).
(10) Remove valve body.
(11) Remove accumulator spring and piston (Fig.
71).
NOTE: The 32RH is equipped with an additional
spring under the accumulator piston.
Fig. 71 Accumulator Piston And Spring
Fig. 68 Adjusting Screw Bracket, Springs, and
Valves
Fig. 69 Repair Stand
Fig. 70 Park/Neutral Position Switch
TJ
TRANSMISSION AND TRANSFER CASE
21 - 115
DISASSEMBLY AND ASSEMBLY (Continued)