Jeep Wrangler 1997 Manual - page 885
INSTALLATION
(1) Position the seat on the rear floor panel and
engage the seat frame pivot pins with the pivot
brackets.
(2) Install the hitch pins on the seat frame pivot
pins.
(3) Move the seat back to the latch position and
engage the strikers with the latch brackets.
ADD-A-TRUNK
REMOVAL
(1) Release latches under trunk panel and lift
panel up.
(2) Remove bolts attaching trunk to inner body
panel (Fig. 66).
(3) Separate trunk from vehicle.
INSTALLATION
(1) Position the trunk in the cargo space.
(2) Install the bolts.
FRONT CARPET
REMOVAL
(1) Remove the screws attaching the console to the
floor pan.
(2) Remove the retainers attaching the carpet to
the dash panel (Fig. 67).
(3) Disengage the snaps around the perimeter of
the seats.
(4) Remove carpet from the vehicle
INSTALLATION
(1) Position the carpet in the vehicle
(2) Engage the snaps around the perimeter of the
seats.
(3) If equipped, Install the retainers attaching the
carpet to the dash panel.
(4) Install the screws attaching the console to the
floor pan.
CENTER CARPET
REMOVAL
(1) Disengage the snaps around the perimeter of
the front seats.
(2) Remove the carpet.
INSTALLATION
(1) Position the carpet in the vehicle.
(2) Engage the snaps around the perimeter of the
front seats.
CARGO AREA CARPET
REMOVAL
(1) Position the rear seat in the full forward posi-
tion.
(2) Pull the carpet from under the rear seat.
(3) If equipped, remove the Add-A-Trunk.
(4) Route the rear seat belt buckles through the
cargo area carpet.
(5) Separate the carpet from the vehicle (Fig. 68).
INSTALLATION
(1) Position the carpet in the vehicle.
(2) Route the rear seat belt buckles through the
cargo area carpet.
(3) If equipped, install the Add-A-Trunk.
(4) Return the rear seat to the full rearward posi-
tion.
WHEELHOUSE CARPET
REMOVAL
(1) Position the rear seat in the full forward posi-
tion.
(2) If equipped, remove the Add-A-trunk.
Fig. 66 Add-A-Trunk
Fig. 67 Front Carpet
TJ
BODY
23 - 39
REMOVAL AND INSTALLATION (Continued)