Jeep Wrangler 1997 Manual - page 920
(18) Install detent plug and tighten to 19 N·m (14
ft. lbs.) (Fig. 46).
(19) Install shift tower gasket onto shift tower.
(20) Install the shift tower oil deflector and gasket
onto the adapter or extension housing.
(21) Install shift tower onto transmission case
(Fig. 47).
(22) Install bolts to hold shift tower to transmission
case. Tighten tower bolts to 18 N·m (13 ft. lbs.) torque.
(23) Install new metal o-ring onto the backup lamp
switch.
(24) Install backup lamp switch (Fig. 48). Tighten
switch to 44 N·m (32.5 ft. lbs.) torque.
(25) Install new seal in adapter/extension housing.
(26) Install vehicle speed sensor, if necessary.
(27) Install clutch housing, release bearing, release
fork and retainer clip.
Fig. 44 Install Detent Ball
Fig. 45 Install Detent Spring
Fig. 46 Install Detent Ball Plug
Fig. 47 Install Shift Tower
Fig. 48 Install Backup Lamp Switch
21 - 14
TRANSMISSION AND TRANSFER CASE
TJ
DISASSEMBLY AND ASSEMBLY (Continued)