Jeep Wrangler 1997 Manual - page 891
LICENSE PLATE BRACKET
REMOVAL
(1) If installed, remove the license plate.
(2) Remove the screws attaching the license plate
bracket to the body (Fig. 81).
(3) Separate the bracket from the body.
INSTALLATION
(1) Position the bracket on the body.
(2) Install the screws attaching the license plate
bracket to the body.
(3) If removed, install the license plate.
TAILGATE
REMOVAL
(1) Remove the spare tire.
(2) Open the tailgate and remove the CHMSL con-
tact cover (Fig. 82).
(3) Disengage the CHMSL electrical connectors.
(4) Remove the screws that attach the tailgate
hinge to the tailgate.
(5) Separate the tailgate from the vehicle.
INSTALLATION
If necessary, transfer tailgate related components.
(1) Install the screws that attach the tailgate
hinge to the tailgate.
(2) Engage the CHMSL electrical connectors.
(3) Install the CHMSL contact cover.
(4) Close the tailgate and install the spare tire.
Fig. 79 Spare Tire
Fig. 80 Spare Tire Bracket
Fig. 81 License Plate Bracket
Fig. 82 CHMSL Contact Cover
TJ
BODY
23 - 45
REMOVAL AND INSTALLATION (Continued)