Jeep Wrangler 1997 Manual - page 884
SHIFT BOOT
REMOVAL
(1) Using a trim stick, pry the shift boot from the
bezel.
(2) Using a small flat blade, pry the shift pattern
insert from the shift knob.
(3) Remove the nut attaching the shift knob to the
shift lever (Fig. 64).
(4) Remove the knob and slide the shift boot from
the shift lever.
INSTALLATION
(1) Slide the shift boot over the shift lever.
(2) Position the shift knob on the lever and install
the nut.
(3) Position the shift pattern insert on the knob
and press into place.
REAR SEAT
REMOVAL
(1) Move the front seats to the full forward posi-
tion.
(2) Pull on the rear seat latch to disengage the
rear seat from the striker.
(3) Lift the rear seat to the forward tumble posi-
tion.
(4) Remove the hitch pins from the seat frame
pivot pins.
(5) Slide the seat to the left to disengage the pivot
pin from the pivot bracket.
(6) Slide the seat to the right to disengage the
opposite pivot pin from the pivot bracket (Fig. 65).
(7) Remove the seat through the passenger door
opening.
Fig. 65 Rear Seat
Fig. 64 Shift Boot
23 - 38
BODY
TJ
REMOVAL AND INSTALLATION (Continued)