Jeep Wrangler 1997 Manual - page 1026
(d) Using snap-ring plier, pull rear band lever
pivot from transmission case (Fig. 90).
(e) Separate rear band servo lever from trans-
mission.
(33) Compress front servo rod guide about 1/8 in.
with large C-clamp and Tool C-4470, or Spring Com-
pressor Tool C-3422-B (Fig. 91).
(34) Remove front servo rod guide snap ring (Fig.
91). Exercise caution when removing snap ring.
Servo bore can be scratched or nicked if care is
not exercised.
(35) Remove compressor tools and remove front
servo rod guide, spring and servo piston.
(36) Compress rear servo spring retainer about
1/16 in. with C-clamp and Tool C-4470 or SP-5560
(Fig. 92). Valve Spring Compressor C-3422-B can also
be used to compress spring retainer.
(37) Remove rear servo spring retainer snap ring.
Then remove compressor tools and remove rear servo
spring and piston.
ASSEMBLY
(1) Install rear servo piston, spring and spring
retainer. Compress rear servo spring and retainer
with Compressor Tool C-3422-B (Fig. 92) or a large
C-clamp.
(2) Install front servo piston, spring, and rod
guide. Compress front servo rod guide with Valve
Spring Compressor C-3422-B and install servo snap
ring (Fig. 91).
REAR BAND—32RH
(3) Install rear band
(a) Insert rear band through pan opening in
transmission case. Single lug toward pan face.
(b) Place single lug under adjuster screw and
two lugs over anchor pin in transmission case (Fig.
84).
REAR BAND—30RH
(4) Install rear band.
(a) Assemble link bar to band. Notched side of
link toward band (Fig. 90).
(b) Insert rear band through pan opening in
transmission case.
(c) Insert hook on band onto adjuster lever.
(d) Align holes in link bar with hole in transmis-
sion case outboard of rear support opening (Fig.
89).
(e) Insert anchor pin into case through link bar.
(5) Examine bolt holes in overrunning clutch cam.
Note that one hole is not threaded (Fig. 93). This
hole must align with blank area in clutch cam bolt
circle.
Fig. 90 Rear Band Servo Lever Pin
Fig. 91 Compressing Front Servo
Fig. 92 Compressing Rear Servo Spring
21 - 120
TRANSMISSION AND TRANSFER CASE
TJ
DISASSEMBLY AND ASSEMBLY (Continued)