Jeep Wrangler 1997 Manual - page 857
of
1152
REAR SEAT CUSHION COVER
REMOVAL
(1) Remove rear seat.
(2) Remove the seatback.
(3) Disengage the J-straps at the rear cushion cor-
ners.
(4) Disengage the seat cushion cover zipper.
(5) Carefully, remove the seat cushion frame from
the cushion/cover.
(6) Roll the cover from seat cushion and disengage
the hook and loop fasteners (Fig. 9).
INSTALLATION
(1) Position the cover on the cushion and roll cover
downward over the corners.
(2) Install the seat cushion frame into the cushion/
cover.
(3) Engage the seat cushion cover zipper.
(4) Engage the J-straps at the rear cushion cor-
ners.
(5) Install the seatback.
(6) Install rear seat.
Fig. 9 Hook And Loop Fasteners
TJ
BODY
23 - 11
REMOVAL AND INSTALLATION (Continued)