Jeep Wrangler 1997 Manual - page 865
SIDE VIEW MIRROR
REMOVAL
(1) Remove the screws attaching the mirror to the
door hinge (Fig. 12).
(2) Remove the mirror from the door hinge.
INSTALLATION
(1) Clean the door hinge-mirror base contact sur-
face.
(2) Position the mirror base at the door hinge.
(3) Install the screws attaching the mirror base to
the door hinge.
FENDER FLARE
REMOVAL
(1) Remove the side marker lamp.
(2) Remove the screws that attach the flare to the
front fender or rear wheelhouse (Fig. 13).
(3) Separate the flare from the body.
INSTALLATION
(1) Clean the contact surface on the body.
(2) Clean the contact surface on the flare and posi-
tion it on the front fender or wheelhouse.
(3) Install the screws attaching the flares to the
front fender or wheelhouse.
(4) If removed, install the side marker lamp.
FRONT FENDER
RIGHT FENDER REMOVAL
(1) Disconnect and remove the battery.
(2) Remove the air cleaner housing.
(3) Remove the bolts attaching the Power Distribu-
tion Center (PDC) to the fender.
(4) Disengage the PDC wire harness retainers on
the battery tray and fender.
(5) Move and secure the PDC.
(6) Disengage the high pressure air conditioning
line retainer on the fender.
Fig. 13 FENDER FLARES
Fig. 12 Side View Mirror
TJ
BODY
23 - 19
REMOVAL AND INSTALLATION (Continued)