Jeep Wrangler 1997 Manual - page 1024
of
1152
REAR BAND—32RH.
(30) Remove rear band. The 32RH transmission is
equipped with a double-wrap band that does not
require a link bar.
(a) Remove low-reverse drum and overrunning
clutch as assembly. Slide drum and clutch through
rear band and out of case (Fig. 84). Set drum and
clutch assembly aside for cleaning and inspection.
(b) Remove rear band from case (Fig. 84).
Fig. 80 Rear Band Adjuster Location
Fig. 81 Low-Reverse Drum Snap Ring
Fig. 82 Rear Support
Fig. 83 Overrunning Clutch Cam Bolt Locations
Fig. 84 Low- Reverse Band and Drum—32RH
21 - 118
TRANSMISSION AND TRANSFER CASE
TJ
DISASSEMBLY AND ASSEMBLY (Continued)