Jeep Wrangler 1997 Manual - page 973
of
1152
DISASSEMBLY
(1) Remove input shaft and output shaft pilot
bearing from output shaft (Fig. 111), if necessary.
(2) Measure and note thrust clearance of output
shaft gears (Fig. 112). First gear clearance should be
0.10 – 0.40 mm (0.004 – 0.0197 in.). Second and third
gear clearance should be 0.10 – 0.30 mm (0.003 –
0.0118 in.).
Fig. 110 Output Shaft And Gears
Fig. 111 Remove Output Shaft Pilot Bearing
Fig. 112 Check Output Shaft Gear Thrust Clearance
TJ
TRANSMISSION AND TRANSFER CASE
21 - 67
DISASSEMBLY AND ASSEMBLY (Continued)