Jeep Wrangler 1997 Manual - page 975
of
1152
(6) Position the 3–4 synchronizer onto the output
shaft.
(7) Using Adapter 6761 and a shop press, press
the 3–4 synchronizer onto the output shaft.
(8) Select the thickest snap-ring that will fit into
the snap-ring groove of the output shaft (Fig. 119).
(9) Install snap-ring to hold 3–4 synchronizer onto
output shaft.
Fig. 116 Remove 3–4 Synchronizer Snap Ring
Fig. 117 Remove 3–4 Synchronizer And Third Gear
Fig. 118 Synchronizer Identification
Fig. 119 Select 3–4 Synchronizer Snap-ring
TJ
TRANSMISSION AND TRANSFER CASE
21 - 69
DISASSEMBLY AND ASSEMBLY (Continued)