Jeep Wrangler 1997 Manual - page 935
(6) Remove first gear bearing inner race lock ball
with pencil magnet (Fig. 104).
(7) Remove first gear synchronizer ring.
(8) Using Bearing Splitter P-334 or suitable press
plates positioned under second gear, press 1–2 syn-
chronizer, reverse gear, and second gear from output
shaft (Fig. 105).
(9) Remove second gear needle roller bearing from
the output shaft or second gear.
(10) Remove select fit snap-ring holding the 3–4
synchronizer onto the output shaft (Fig. 106).
(11) Using Bearing Splitter P-334 or suitable press
plates positioned under third gear, press the 3–4 syn-
chronizer and third gear from output shaft (Fig. 107).
(12) Remove third gear needle roller bearing from
output shaft or gear.
ASSEMBLY
(1) Lubricate transmission components with speci-
fied gear lubricant.
Fig. 104 Remove First Gear Bearing Inner Race
Lock Ball
Fig. 105 Remove Second Gear, Reverse Gear, And
1–2 Synchronizer
Fig. 106 Remove 3–4 Synchronizer Snap Ring
Fig. 107 Remove 3–4 Synchronizer And Third Gear
TJ
TRANSMISSION AND TRANSFER CASE
21 - 29
DISASSEMBLY AND ASSEMBLY (Continued)