Jeep Wrangler 1997 Manual - page 928
of
1152
(5) Install snap-ring onto 3–4 shift rail.
(6) Install the reverse check ball into the interme-
diate plate (Fig. 78).
(7) Install the interlock pin into the reverse shift
rail (Fig. 79).
(8) Assemble the reverse arm bracket to the
reverse fork (Fig. 80).
(9) Install reverse shift rail into intermediate plate
and position reverse arm bracket to intermediate
plate (Fig. 81).
(10) Install snap-ring onto reverse shift rail (Fig. 82).
Fig. 78 Install Reverse Check Ball
Fig. 79 Install Reverse Interlock Pin
Fig. 80 Install Reverse Arm Bracket to Fork
Fig. 81 Install Reverse Shift Rail
Fig. 82 Install Reverse Snap-ring
21 - 22
TRANSMISSION AND TRANSFER CASE
TJ
DISASSEMBLY AND ASSEMBLY (Continued)