Jeep Wrangler 1997 Manual - page 917
of
1152
(3) Align geartrain and shift rails with mating
holes in transmission case and install transmission
case to the intermediate plate (Fig. 34). Verify that
the transmission case is seated on the intermediate
plate locating pins.
(4) Install new front bearing snap rings (Fig. 35).
Fig. 31 Separate Intermediate Plate and
Transmission Case
Fig. 32 Remove Intermediate Plate from
Transmission Case
Fig. 33 Apply Sealer to Transmission Gear Case
Fig. 34 Install Transmission Gear Case to the
Intermediate Plate
Fig. 35 Install Front Bearing Snap-rings
TJ
TRANSMISSION AND TRANSFER CASE
21 - 11
DISASSEMBLY AND ASSEMBLY (Continued)