Oce Arizona T220UV User Manual - Usage.
Re-setting the Lamp Usage Statistics |
6/2/04
6-99
22.
Reconnect the grounding cable (Allen wrench), the thermal sensor, and two lamp
power connectors.
Figure 48 Cable, Sensor and Power Connectors
23.
Close the gantry doors.
24.
Turn the printer power ON.
6.7
Re-setting the Lamp Usage Statistics
After replacing a lamp it is important to re-set the lamp usage statistics so that
you can monitor lamp usage over time.
1.
In the Operator/Maintenance menu press the MENU button until you see Lamp
Usage.
2.
Press ACCEPT to enter the Lamp Usage menu. Press MENU until you see “reset
lamp usage”.
3.
Press ACCEPT to see “reset lamp usage: lamp B”. If you have changed the Blot side
lamp, press ACCEPT. If you changed the Carriage side lamp, press the + or - key to
select lamp C, then press ACCEPT.
4.
Press ACCEPT one more time and the lamp use time and number of strikes will be
re-set to zero.