Oce Arizona T220UV User Manual - Color Bar
Menu Structure |
6/2/04
2-39
COLOR BAR
The Color Bars menu prints a set of color bars. The eleven color bars start with
Light Magenta and end with Black. Follow these steps to print the color bars:
1. Navigate to OPERATOR/TEST PRINTS nozzle print. Press the
MENU button and you will see:
color bars
2. Press ACCEPT. You then see:
COLOR BARS
dir.: (bidir L<->R, unidir L<-R)
3. Use the +/- buttons to set the write direction, and press ACCEPT. You
then see:
COLOR BARS
print width: (8.0" - 59.9")
4. Use the +/- buttons to set print width (8.0" - 59.5"), and press ACCEPT.
You then see:
COLOR BARS
2 pass
5. Use the +/- buttons to change the number of passes, and press ACCEPT.
You then see:
COLOR BARS
vertical offset from origin: 0.26m
6. Use the +/- buttons to set print width (8.0" - 59.5"), and press ACCEPT.
You then see:
COLOR BARS
Thickness: 00.254mm
7. Use the +/- buttons if you need to change the media thickness. Then press
ACCEPT. You then see:
Place media....
8. Press ACCEPT. The printer begins printing the color bars.
CONFIGURATION PRINT
The Configuration Print menu provides the operator and Océ Display Graphics
Systems service technicians with a printout of machine-settings data that is useful if
the unit must be diagnosed or recalibrated. A current configuration print for your
printer should be stored for reference.