Oce Arizona T220UV User Manual - page 53
Menu Structure |
6/2/04
2-41
Print Parameters
The Print Parameters menu lets you set Enable Job Parameter Changes. If this is
set to ON, you can decide which of the following options are presented to the
operator prior to printing (See “Print Job Parameter Options” on page 55):
• BiDirectional Printing - either in both directions or just right to left
• # of Copies - print up to 100 copies of an image
• # of Overprints - prints the image on the media up to 3 times
Follow these steps to use the Print Parameters menus:
1. Press the MENU button twice at the online screen.
2. Press the ACCEPT button at MAIN MENU operator. You then see:
OPERATOR maintenance
3. Press MENU twice then ACCEPT to access the Print Parameters menu.
INK Menu
The Ink Menu lets you install new ink bottles, when required.
1. Press the MENU button twice at the online screen.
2. Press the ACCEPT button at MAIN MENU operator. You then see:
OPERATOR maintenance.
3. Press MENU until you see INK Menu, then ACCEPT to access the
menu. Use the +/- keys to select the ink color you want to change.
4. You will be prompted to scan the ink bottle barcode or, if you wish, to
enter it manually.
Delete Files
The printer’s hard drive has a capacity of 70 gigabytes for storing print jobs. When the
drive is full, the oldest file is automatically removed to make more space available. The
Delete Files menu lets you delete all print job files stored on the drive. It is not possible
to select particular files for deletion - using this option deletes all files (print jobs) on the
drive.