Oce Arizona T220UV User Manual - page 119
Weekly Maintenance |
6/2/04
7-107
8.
Using the swab, apply the flush thoroughly onto the nozzle surface while gently
moving the swab back and forth to free the ink buildup.
9.
Dip the swab into the cup of flush again and wipe the nozzle surface in one
direction from top to bottom until visibly clean of ink.
10.
Repeat steps 8, 9 and 10 for each color. Use a new swab for each row of print
heads and never mix a stained swab with other colors.
11.
Store flush containers and unused cleaning items for next scheduled cleaning.
12.
When swapping is complete, close the gantry doors and press the Accept button
on the control panel to restart the printer.
13.
Perform a Recovery Purge.
14.
Run a test print and verify that all nozzles are firing properly.
Important: Don't force the swab against the print head nozzles, as it may scratch
this surface.