Oce Arizona T220UV User Manual - 0.1.2
Océ | Installing Special Prints
-114-
3010102780-A
0.1.2
Method B - Parallel Transfer with Commad Line
1.
Connect a parallel cable between your computer and the T220UVprinter.
2.
Prepare the T220UV for receiving data through the parallel port by doing the
following at the printer Control Panel:
• a. Navigate to the Configure I/O menu using the MENU button, then
press ACCEPT.
• b. Press the - or + key until you see "active: parallel" on the display, then
press ACCEPT.
• c. Press ONLINE to exit the menu system.
3.
Open a Command Prompt and input:
C:\>copy xxfilename.Print lpt1
After transfer, the file is located in the Operator/Special Prints menu.
4.
Set the Configure I/O menu back to SCSI transfer mode to enable transferring of
regular print jobs from PosterShop.
5.
Use the Operator / Special prints menu to access the file.
0.2
Printing the Menu Tree
The Menu Tree Print is a poster that illustrates the Operator, Print Queue, and
Configuration menu structure of the Arizona T220UV printer. It also contains Safety
Guidelines, a summary of the Maintenance Schedule, and Application Tips.
0.2.1
Printing Considerations
The Menu Tree Print file is pre-sized at 36 x 52 inches. It has an embedded profile
optimized for printing in 4pass mode on Arizona Indoor/Outdoor Poster Grade paper
(OIN #3011690402). It also has an 8-inch left offset embedded in the image.